Technical Specification

Lot-2: SP4  Sound System with all Eequipment for Aauditorium	PA Box SRX 500	Input Power	400W RMS
		Configuration	Two Way
		Frequency Response	50-20,000Hz
		Low Frequency Speaker	2 × 15”
		High Frequency Unit	Dynamic Horn, Aluminium die-cast 4” × 10”
		SPL at (1W/1m)	101dB
		Max. Rated SPL	127dB
		Nominal Impedance	8
		Crossover Frequency	6kHz
		Port	Free Flow Flared
		Input Connectors	Speakon + Terminal Strip
		Dimensions	W510 × H1135 × D505 mm
		Weight	49.50kg
	High Power PA Amplifiers SSA-5000 EM	Power Output	750W Max., 500W RMS at 10% THD
		Output Regulation	2 dB, no load to full load at 1kHz
		Input Channels	7 × Mic 0.8mV/4.7k, 2 × Aux 100mV/470 k 1 × Line 1V/50k
		Frequency Response	50-15,000Hz ±3dB
		Signal to Noise Ratio	60dB
		Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
		Outputs	Preamp 200mV/600, Line 1V/1k
		Speaker Outputs	4, 8, 70V & 100V
		Power Supply	AC: 220-240V 50/60Hz DC: 36V (3×12V Car Battery)
		Power Consumption	AC: 1000VA DC: 8A
		Dimensions	W510 × H172 × D385 mm
		Weight	26.7kg
	PA Monitor Box
	High Power PA Amplifiers SSA-250 M	Power Output	300W Max., 250W RMS at 10% THD
			220W RMS at 5% THD, 200W RMS at 2% THD
		Output Regulation	2 dB, no load to full load at 1kHz
		Input Channels	6 × Mic 0.65mV/4.7k, 2 × Aux 100mV/470 1 × Line 1V/50k
		Frequency Response	50-15,000Hz ±3dB
		Signal to Noise Ratio	60dB
		Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
		Outputs	Preamp 200mV/600, Line 1V/1k
		Speaker Outputs	4, 8, 70V & 100V
		Power Supply	AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
		Power Consumption	AC: 500VA DC: 6A
		Dimensions	W450 × H160 × D340 mm
		Weight	16.0kg
	Mixer SM 1203E Stranger	Frequency Response	25Hz to 25 KHz
		Mic Input	2K Ohms../Gain- 10dB to – 72dB
		Line Input	20K Ohms Blanaced/42dB
		Main Out	Main (L+R) & Mono Output. XLR Balance/Unbalance PL ¼ Socket Stereo RCA outputs for recording
		Equalization	3 Band active Eq on each channels (LOW/MID/HIGH)
		Controls	2 AUX send (Pre-fader & Post- fader), level, Pan, L/R & Mono/mute switch on each channel.
		Fader	60mm long taper faders.
		Echo System	Digital signal Processing
		Monitor	Headphone
		Main putput connector	XLR & ¼ balance
		S/N Ratio	89 dB
		Distortion	0.01%
		Power Supply	23VA MAX/19VA MAX/ 15VA MAX @230V/50Hz
		Dimension	662(W) X 380 (D) X 110 (H) mm 543(W) X 380(D) X 110(H) mm 428(W) X 380(D) X 110(H) mm
		Weight	6.900/ 5.700/ 4.700 Kgs
	PA Microphone	Frequency Response	50-15,000Hz
Sensitivity		2mV/Pa
Impedance		600
Long Stand	Standard Height (5 pcs)
Connecting Wire	As Required (For Complete installation)
Head Amplifier Peavey CS-2000	- Two temperature-dependant dual-speed fans - 1075 watts (rms) per channel at 2 ohms - 760 watts (rms) per channel at 4 ohms - 495 watts per channel at 8 ohms - 2150 watts per channel at 4 ohms bridged - 5-year warranty - 2-rack-space stereo power amp featuring DDT™ - Weight Unpacked: 36.30 lb(16.465 kg) - Weight Packed: 42.00 lb(19.051 kg) - Width Packed: 5.75"(14.605 cm) - Height Packed: 22.75"(57.785 cm) - Depth Packed: 21"(53.34 cm)